Recently a request was made for information regarding Hunter Gas Fireplaces. As Hunter is no longer in business it is tough to find information. One major issue regarding gas fireplaces is the placement of the logs.
If the logs are not placed precisely inside the fireplace, impingement of the flame may occur causing soot and carbon monoxide issues. These types’ circumstances will not only damage the unit, but a severe health risk if the fumes get into your living space. Click the link below to download the complete manual.
The manual covers the following model numbers:
1. Cozy Comfort FI-25
2. Cozy Comfort II F125
3. Designer Series HDS3000, HDS2000
4. HDV30 Direct Vent
5. HDV2500 Direct Vent
6. SF25E
7. SF25E
27.35 mb
December 13th, 2008 at 8:01 pm
You know, I have to tell you, I really enjoy this blog and the insight from everyone who participates. I find it to be refreshing and very informative. I wish there were more blogs like it. Anyway, I felt it was about time I posted, I?ve spent most of my time here just lurking and reading, but today for some reason I just felt compelled to say this.
January 13th, 2009 at 8:16 am
I have a customer who has a Hunter HDV30 gas fireplace and needs a 3 probe mercury vapor switch. The pn# in the manual is 916243. Any idea where I might be able to find one?
January 13th, 2009 at 1:08 pm
Where are you located?
January 16th, 2009 at 3:43 pm
SE Minnesota
January 16th, 2009 at 9:25 pm
If you were in Canada i might be able to help you out. I can only suggest to go to a local Fire Place supplier for your part. Wish I could be of more help.
April 23rd, 2009 at 3:29 pm
i have a hunter gas fireplace and I need an owners manual for. The model # is hf 130. I just need to know the placement of the logs.
May 21st, 2009 at 2:32 pm
Hello!
I have a Hunter gravity vent fireplace and for long time I’m lucking for manual for it. Please help me to find it even contra cost. I really need it.
Model number: HFI 30-3
Serial number: 9615771
Thank your very much in advance.
George
May 21st, 2009 at 5:07 pm
I have a Huner HDV2500 fireplace. The company I bought it from (Fireside Corner, 1114 Portage Ave, Wpg, MB.) does not appear to be in business any longer. The blower is making a lot of noise when turned on. Where do you suggest I have it fixed or get a part?
May 21st, 2009 at 7:19 pm
Most blowers make noise due to dirt.Carefully remove it from the fire place and wash it with light soap and warm water. The motor can also be washed as water will not hurt it. rinse carefully in the laundry tub with hot water to remove all the soap and either dry with compressed air or shop vac blowing out air or hair drier. Use a light sewing machine oil on the little bushings at either end and reinstall. I would suggest you run it immediately for about 10 to 15 minutes after you install it to make sure it is completely dry. I have had good success doing it this way as in most cases parts are not nessessary.
May 21st, 2009 at 7:22 pm
Unfortunately the only ones I have are listed in the download section but if i come across one i will put it on the site.
June 4th, 2009 at 7:42 am
Great post! Just wanted to let you know you have a new subscriber- me!
August 9th, 2009 at 6:34 am
we have a hunter HDV30 fireplace we would like to install but need venting parts for installation – located in ottawa canada, would you know of a place where we could purchase?
August 23rd, 2009 at 1:31 pm
Hi!
We have a Hunter HF540-3 gas stove. Just wondering if anyone knows how to remove the glass panes in order to clean them?
Any info would be great.
September 21st, 2009 at 10:52 am
I have a Hunter HFS40 Fireplace and I misplaced my manual. Does anybody have or can you tell me where I can get one? Any help would be appreciated.
Thanks
September 28th, 2009 at 1:54 pm
I’m looking for a replacement front glass (cracked) for my gas fireplace model ASF40-3 any suggestions?
September 28th, 2009 at 10:28 pm
You can have a look at this link.
http://www.backyardman.com/wp-admin/post.php?action=edit&post=340
September 28th, 2009 at 10:29 pm
Have a look at this link.
http://www.backyardman.com/wp-admin/post.php?action=edit&post=340
October 27th, 2009 at 7:39 pm
Do you have any info on the Hunter tech fireplace insert model #hifi 30-3
October 28th, 2009 at 9:55 am
Only what is posted in the manual section
November 5th, 2009 at 12:57 pm
Hi:
I have a Hunter F125 fireplace. Any idea where I can find replacment logs?
November 9th, 2009 at 8:38 pm
I have a Hunter direct vent gas fire plave model HDV 35 I need to know where I can purchase a conversion to propane kit
November 15th, 2009 at 11:08 pm
I have a Hunter HF130 manual if somebody needs some pages scanned. I am looking for a blower temperature switch part #916578 any help would be appreciated, thanks Steve
November 16th, 2009 at 8:37 am
Any manuals would be helpful. I will post them if you would like to send them over to info@backyardman.com . As far as your part request, if you look on my site and do a seach for fireplace, there is a company listed for your part needs.
Thanks Backyardman
December 18th, 2009 at 3:50 pm
Please email me a manual for Hunter Designer series gas fireplace, thanks
December 22nd, 2009 at 9:58 am
The only manuals I have are in the manual section. You can download directly from there for your convienience.
December 23rd, 2009 at 4:38 pm
I am looking for a Hunter fireplace Simpson Dura Vent adapter Hunter part # 927688. No supplier I have contacted has any left in stock. This adapter fits on Hunter DV fireplaces and is 4 x 7 at one end and 4 x 6 5/8 at the other end to fit the Simpson Dura Vent 6 5/8 DV venting
December 30th, 2009 at 11:02 am
I do have a supplier listed on the site. If they don’t have it then I might suggest a sheet metal fabricator to have a custom one made. Anything is possible when you think outside the box. Good luck.
January 12th, 2010 at 11:00 pm
trying to locate logs for gas fireplace wondering if you know where i could locate some
thanks
Chris
January 13th, 2010 at 12:24 am
There is a supplier listed on my site for fireplace parts. i might suggest you contact them ad hopefully they can help you. Good luck.
January 27th, 2010 at 7:03 am
I have a hunter hdv2500-3 with a blower that simply is not turning on. There is power going to the unit. The fireplace operates as normal, just no blower. Where should I begin, and is it safe to operate without the blower?
January 27th, 2010 at 9:42 am
it is safe to operate without the blower. Blowers in all units are an add-on. In order to determine if the blower is the issue, check for power at the blower motor terminals at the blower motor. If power is found cross the 2 terminals and the motor spins freely then the motor is defective. If no power is found then start checking backwards. There is a rheostat that controls the fan speed and a thermostatic click switch located somewhere on the unit to control on/off based on temperature. You can jumper that switch to see if the motor starts. Please be careful as the motor circuit is 120 volts AC.
Safety first. Let me know how you make out.
BYM
February 6th, 2010 at 3:53 pm
I have a Hunter DV fireplace, unsure of model number. Where can I find the model number?Blower isn’t working. Appreciate your advice to Max, Jan. 27; it may help me fix mine, too. However, if the blower needs replacement, how do you remove it? I can’t seem to figure out how it all goes together and comes apart.
February 6th, 2010 at 5:37 pm
I might suggest to see if it moves freely first and if power is getting to it. Things to check if no power, burnt wiring, click switch which controls fan on/off, Rheostat (fan speed). If you ned to remove fan, unfortunately all the inside guts will have to come out to get proper access. Remove glass, logs, burner assembly and then base plate. Not always the same in all Fire Places but not far off that routine. Make sure gas is secured before anything as it is a preventable accident.
On reassembly, the logs must go in the exact way they came out or CO can be produduced. Let me know if you need any more help.
BYM
March 25th, 2010 at 12:47 pm
Can I find out the log placement for Hunter Fireplace HFS40 MFS40 SFS40 AFS40 -3 ?
April 24th, 2010 at 12:48 pm
we have a hunter gas fireplace model hw21 and want to remove the glass for cleaning. would appreciate any suggestions you may have. thank you
April 30th, 2010 at 8:25 am
Can I get an owner’s manual for a Hunter HF130. I would appreciate it
June 24th, 2010 at 8:16 am
I am looking to buy a HUNTER HFS40 FREE STANDING GAS FIREPLACE. Does anybody know anything about these units? I am a little apprehensive because I have never heard the name before. Are they a decent unit and are the parts easily attainable? I read above that they are no longer in business so I am assuming parts may be a little difficult to come by, but don’t know if someone picked up the slack with aftermarket parts. Any advice or information would be greatly appreciated.
Thank you
Bill
August 11th, 2010 at 4:06 pm
We have a Hunter Fireplace Insert Model HF130 that has performed well until we had a recent Lightning and Thunder storm. Since then, the Themostatic control will not activate the Fireplace. We have replaced the Therostat but that is not the fix. The manual start function is still operative. Any suggestions regard a fix , parts? We live in Western Canada.
Leon Trainor
August 16th, 2010 at 10:43 am
George Says:
May 21st, 2009 at 2:32 pm
Hello!
I have a Hunter gravity vent fireplace and for long time I’m lucking for manual for it. Please help me to find it even contra cost. I really need it.
Model number: HFI 30-3
Serial number: 9615771
Thank your very much in advance.
George
Hi George: I am also looking for a manual for the same Hunter Gravity vented unit. Have you had any luck getting a manual as yet?
Doug
September 2nd, 2010 at 9:34 pm
Unfortunately the only manuals I have are the ones listed
September 2nd, 2010 at 9:37 pm
If you have a look on my site, I have a supplier listed. If you contact them they should be able to sell you the parts required. The is a button swith which is thermally activated in the firebox area.
September 2nd, 2010 at 9:39 pm
Most free standing fireplaces are pretty simple. Just time consuming to take them apart. Hunter is out of bussiness so becareful notheing gets broken
September 2nd, 2010 at 9:41 pm
Unfortunately the only manuals I have are the ones listed on the site
September 2nd, 2010 at 9:44 pm
There is a supplier listed on the site for aftermarket. If you contact them,they should be able to help