Comments on: Hunter Gas Fireplace Manuals

By: backyard

backyard — Sat, 06 Feb 2010 21:37:09 +0000

I might suggest to see if it moves freely first and if power is getting to it. Things to check if no power, burnt wiring, click switch which controls fan on/off, Rheostat (fan speed). If you ned to remove fan, unfortunately all the inside guts will have to come out to get proper access. Remove glass, logs, burner assembly and then base plate. Not always the same in all Fire Places but not far off that routine. Make sure gas is secured before anything as it is a preventable accident.

On reassembly, the logs must go in the exact way they came out or CO can be produduced. Let me know if you need any more help.

BYM

By: Rich

Rich — Sat, 06 Feb 2010 19:53:41 +0000

I have a Hunter DV fireplace, unsure of model number. Where can I find the model number?Blower isn’t working. Appreciate your advice to Max, Jan. 27; it may help me fix mine, too. However, if the blower needs replacement, how do you remove it? I can’t seem to figure out how it all goes together and comes apart.

By: backyard

backyard — Wed, 27 Jan 2010 13:42:30 +0000

it is safe to operate without the blower. Blowers in all units are an add-on. In order to determine if the blower is the issue, check for power at the blower motor terminals at the blower motor. If power is found cross the 2 terminals and the motor spins freely then the motor is defective. If no power is found then start checking backwards. There is a rheostat that controls the fan speed and a thermostatic click switch located somewhere on the unit to control on/off based on temperature. You can jumper that switch to see if the motor starts. Please be careful as the motor circuit is 120 volts AC.

Safety first. Let me know how you make out.

BYM

By: max

max — Wed, 27 Jan 2010 11:03:28 +0000

I have a hunter hdv2500-3 with a blower that simply is not turning on. There is power going to the unit. The fireplace operates as normal, just no blower. Where should I begin, and is it safe to operate without the blower?

By: backyard

backyard — Wed, 13 Jan 2010 04:24:07 +0000

There is a supplier listed on my site for fireplace parts. i might suggest you contact them ad hopefully they can help you. Good luck.

By: chris gavard

chris gavard — Wed, 13 Jan 2010 03:00:39 +0000

trying to locate logs for gas fireplace wondering if you know where i could locate some
thanks
Chris

By: backyard

backyard — Wed, 30 Dec 2009 15:02:02 +0000

I do have a supplier listed on the site. If they don’t have it then I might suggest a sheet metal fabricator to have a custom one made. Anything is possible when you think outside the box. Good luck.

By: Bill

Bill — Wed, 23 Dec 2009 20:38:41 +0000

I am looking for a Hunter fireplace Simpson Dura Vent adapter Hunter part # 927688. No supplier I have contacted has any left in stock. This adapter fits on Hunter DV fireplaces and is 4 x 7 at one end and 4 x 6 5/8 at the other end to fit the Simpson Dura Vent 6 5/8 DV venting

By: backyard

backyard — Tue, 22 Dec 2009 13:58:36 +0000

The only manuals I have are in the manual section. You can download directly from there for your convienience.

By: Russ

Russ — Fri, 18 Dec 2009 19:50:31 +0000

Please email me a manual for Hunter Designer series gas fireplace, thanks